Herunterladen Inhalt Inhalt Diese Seite drucken

About The Waterproofi Ng/Dustproofi Ng - Casio ET-L10 Serie Bedienungsanleitung

Robustes smart-handheld-terminal
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Drop resistance
The drop resistance is a test value only and is not guaranteed.
Repeated or frequent shocks may still result in damage, so the terminal should be handled
so as to avoid impacts.
• Water or other moisture on the power-supply terminals could cause sparking or an
electric shock, and soiled contacts could block the connection and impair charging
functionality.
• While the ET-L10 is waterproofed, note the following when using this product:
• If the ET-L10 is exposed to water droplets, thoroughly wipe off the moisture with a dry
cloth.
• Do not use the ET-L10 for long periods in the rain.
• Securely close the connector covers when using the ET-L10.
• Do not press hard on the screen (touch panel) or keys when using the ET-L10 in the rain.
• The back of the ET-L10 may become warm during use. This is normal and does not
indicate a fault.
• Weld Lines
There are seam-like markings in some locations on the terminal. These are
referred to as "weld lines" in the plastic forming process and are not cracks or scratches.
Weld lines do not interfere in any way with the operation of the terminal.
About the Waterproofi ng/Dustproofi ng
The ET-L10 Series models are waterproof and dustproof.
Important!
The water- and dust-proofi ng performance of this product is based on CASIO testing
procedures. Note also that this performance applies to the product at the time of
shipment (delivery to the customer) and is not guaranteed inclusive of the
environment in which the product is used. The warranty does not apply to any
situation where the product is immersed during use, and as with any other electrical
product, great care should be taken when using this product in the rain or similar
situation.
• Precautions When Using this Product
— Check that there is no dust, sand or other foreign matter on the USB port cover and its
respective contact surfaces. Wipe off any foreign matter using a clean and dry soft
cloth. If any soiling is found, wipe it off with a clean, soft, dry cloth. Even very small
amounts of soiling trapped on the contact surfaces (a single hair or grain of sand, etc.)
can cause water to leak into the device.
— Check that the waterproof seals on the USB port cover are free from cracks and other
damage.
— Avoid opening and closing the USB port cover in locations near water or exposed to
sea breezes, and do not open or close it with wet hands.
— Do not drop this product or leave it in locations exposed to temperatures outside the
specifi ed range. Doing so will impair its water- or dust-proofi ng.
• Other Precautions
— The accessories and optional products for this product (cradle-type battery charger,
etc.) are not water- or dust-proof.
— Subjecting this product to a severe impact could render it no longer water- or
dust-proof.
E-9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis