MODMO Saigon+ Benutzerhandbuch Seite 5

1.3. How to get your E-bike ready for the road
The following section explains how to get your Saigon+ E-Bike
ready for riding
Required Tools:
• Allen Key 4-5-6 mm
• Spanner
A. Adjusting the Handlebar
Step 1. Rotate the handlebars until they
are perpendicular to the wheel and frame
B. Inflate the tyres
• Recommendation: 35 – 45 psi. Riding with tyres over or under pressure may result in faster deterioration and/or damage.
• We recommend checking the air pressure regularly every 8 weeks, as bicycle tubes inevitably lose air over time, especially when
not used regularly.
Step 2. Ensure the top-cap is fastened tight,
but not too tight as over-tightening can cause
the handlebar to feel stiff when turning.
Step 3. Tighten the two lateral screws on
the handlebar using the 5mm Allen key
YOU R BI KE
5