Alarm Time Setting - TFA 60.2545 Bedienungsanleitung

TFA_No. 60.2545_Anleit_12_22
Radio-controlled alarm clock
5.1.1 Setting of the time and date
• Press and hold the TIME button in normal mode for three sec-
onds.
• 24H (default) will be flashing. Press the + or – button to choose
12 Hr or 24 Hr system. In the 12-hour system AM or PM (after
12 o'clock) appears on the display.
• Press the TIME button to make the settings in the following
sequence: The time zone (00 - default), the hours, the minutes,
the month/day sequence D/M or M/D (D/M - default), the year,
the month and the day. Press the + or – button to adjust it.
• Confirm the setting with the TIME button.
• The manually set time is overwritten once the DCF time signal
is successfully received.

5.1.2 Alarm time setting

• Press and hold the ALARM button for three seconds to enter
the setting mode.
26
15.12.2022 14:51 Uhr
Radio-controlled alarm clock
• 6:00 (default) or the last adjusted alarm time appear on the dis-
• The hour digits flash.
• Press the + or – button to set the hours.
• Confirm the setting with the ALARM button.
• Set the minutes in the same way.
• To activate the alarm function press the ALARM ON/OFF button.
• The display shows the alarm symbol and 6:00 (default) or the
• When the adjusted alarm time is reached, the alarm rings.
• Press any button (except SNOOZE/LIGHT) and the alarm will
• If the alarm is not stopped manually, the ascending alarm tone
• The alarm symbol remains on the display.
• When the alarm rings, press the SNOOZE/LIGHT button and the
Seite 14
play.
last adjusted alarm time instead of the date.
stop.
automatically turns off after two minutes and it will be reacti-
vated at the same set time on the following day.
snooze function is activated.
27