Cameo AZOR S2 Bedienungsanleitung Seite 13

ENTER – press ENTER to access the menu levels, to make value changes, and to access the
submenus. Confirm value or status changes by pressing ENTER.
and – Select individual menu items in the main menu (DMX address, DMX mode etc.) and
in the submenus. Allows you to change the value of a menu option, such as the DMX address, as
desired (long press = quick value change).
10 RECESSED GRIPS
In addition to the two transport
handles on the base of the unit, there
are practical recessed grips at the top
of the inner sides of the two device
arms.
11 PAN LOCK
Mechanical locking device used
to prevent the rotation of the head
in the horizontal direction during
transport. Disconnect the unit from
the mains, move the head parallel
to the base (8 possible positions)
and push the locking lever up-
wards and then in the direction of
the pan rotation axis (LOCK) to lock it in position. Unlock the device before startup (UNLOCK).
12 TILT LOCK
Mechanical locking device used to prevent rotation of the head in the
vertical direction during transport (7 possible positions). Disconnect the
unit from the mains and slide the locking lever in the direction of the
tilt rotation axis, moving the head of the unit vertically until one of the 7
locking positions is found and the locking lever engages (LOCK). Unlock
the device before startup (UNLOCK).
10
11
LOCK
- Similar to image -
10
UNLOCK
LOCK
12
UNLOCK
13