Configuring The Mega Macs X; Configuring Interfaces; Configuring Wi-Fi - Hella Gutmann mega macs X Schnellstartanleitung

5. | Configuring the mega macs X

5. Configuring the mega macs X
Configure all interfaces and functions under

5.1. Configuring interfaces

Here you can set the interfaces for Wi-Fi and Ethernet.
Configure the interfaces for Wi-Fi and Ethernet under
Configure the interfaces for the printer under

5.1.1. Configuring Wi-Fi

Make your Wi-Fi settings here.
Wi-Fi is a wireless local area network. Data is transmitted wirelessly via a router and DSL modem (access point). The re-
spective devices register in the Wi-Fi router.
5.1.1.1. Searching and Installing a Wi-Fi Interface
Proceed as follows to connect the diagnostic device to a network (router) through Wi-Fi:
1. Select > Settings.
2. Select >Device<.
3. Select >Wi-Fi<.
4. Select the check box Activate Wi-Fi to view available wireless networks. The available wireless networks are dis-
played.
ð The available wireless networks are displayed.
5. Select the requested wireless network.
6. Open the list under IP address mode with
ð If >Determine automatically (DHCP)< (recommended) is set, the DHCP server of the network will assign an IP
address to the mega macs X automatically. This option is set ex works.
ð If >Determine manually< is selected, enter a free network IP address, e.g. 192.168.246.002. under IP ad-
dress.
7. Select >Determine automatically (DHCP)< (recommended) or >Determine manually<.
ð The selection will be saved automatically.
8. Enter the Wi-Fi password.
9. Click to >Connect<.
ð The input will be saved automatically.
54
>Settings.
> Settings > Device.
> Settings > Print.
.
Hella Gutmann
mega macs X