Intended Use; Using The Bluetooth® Function - Hella Gutmann mega macs X Schnellstartanleitung

3. | Device Description
1. Open the package supplied and check for completeness based on the delivery slip. Should you identify any damage to
the package, then open the package in the presence of the delivery service and check the diagnostic device for hidden
damage. Any transport damage to the package supplied and damage to the diagnostic device shall be registered in a
damage report by the delivery service.
2. Take the diagnostic device out of the packaging.
CAUTION!
Danger of short circuit due to loose parts in or on the diagnostic device
Danger of destruction of the diagnostic device/the automotive electronics
Never put the diagnostic device into operation if you suspect that there are loose parts inside or on the diag-
nostic device. In this case please contact the Hella Gutmann repair service or a Hella Gutmann trading part-
ner immediately.
3. Check the diagnostic device for mechanical damage and shake it slightly to ensure that there are no loose parts in-
side.

3.2. Intended Use

The mega macs X is a mobile diagnostic device for detecting and rectifying faults in automotive electronic systems.
The mega macs X provides access to comprehensive technical data sets such as wiring diagrams and service data, set
values and descriptions of vehicle systems. A lot of this data is directly transferred to the diagnostic device from the Hella
Gutmann diagnostic database via online connection. Therefore, the mega macs X should be permanently online.
The mega macs X software is not suitable for repairing electrical machines and devices or home electrics. Diagnostic de-
vices from other manufacturers will not be supported.
If the mega macs X is used in a way not authorized by Hella Gutmann, the protection of the diagnostic device may be in-
fluenced.
The diagnostic device is intended for industrial use. Outside of industrial environments, e.g., in commercial areas or in the
centre of a town, radio interference suppression measures may need to be taken.
The diagnostic device is intended for use on motor vehicles only. It is a precondition for the use of the diagnostic device
that the user has knowledge of automotive technology and is therefore aware of the sources of danger and risks in the
workshop and on motor vehicles.
3.3. Using the Bluetooth® Function
The terms of use of the Bluetooth® function may be restricted or prohibited through law or corresponding legal regula-
tions in certain countries.
Pay attention to the provisions in force in the respective country before using the Bluetooth® function.
38
Hella Gutmann
mega macs X