Digital Controller - HBM K800 Bedienungsanleitung

Important
If a USB power supply and an external power supply are connected, the exter­
nal power supply has priority..
41-pin socket, mini DIN
1
2
3
4
*)
Fig. 6.3 Socket assignment 12V DC IN
6.2

Digital controller

The K800 can be driven either via a USB interface or via a digital input (it is not
possible to operate both interfaces simultaneously):
1. Driven via the USB port
Connect to the computer with a standard USB cable.
Obtain the driver software:
If you are doing your own programming, you must send the PAP x command
(x as the decimal number of the bit pattern of the digital inputs; see below).
Example:
2. Driven via the digital input (25‐pin 1:1 cable)
K800
*)
Ground
+V
IN
SELV circuit
(separated extra‐low voltage)
K800 demo CD or
download from www.hbm.com
PAP4 switches 0 % (data line D2)
A01098_05_X00_00 HBM: public
Operation
12
4 3
2 1
15