Bestway LAY-Z-SPA Mauritius AirJet Gebrauchsanweisung Seite 10

used). Ensure the cover is fitted tightly, as per instructions
to maximize insulation. It shall be recommended that the
cover, when not in use, should be kept off the ground to
retain its cleanliness (particularly the surface in close
proximity to the water spa water surface). The cover should
be stored in an appropriate location, where it cannot be
damaged, or cause damage.
• Check the set water temperature and consider lowering it
for the times when the spa will typically not be in use.
• Depending on external conditions, consider turning off the
heater entirely if not using the spa for an extended period
of time (where the spa provides this option, but still
maintains
residual disinfection/pH-values).
• It is recommended to use an insulating ground cloth
underneath the spa to minimize heat loss through the bottom
of the spa.
• Maintain clean filters to preserve appropriate working
conditions for the pump and avoid unnecessary water
replacement and re-heating.
• Keep the spa away from the rest area to minimize noise
disturbance.
• Do not put the cover on the ground or any other dirty surface
when not in place on the spa.
• When the spa is being used, the cover should be placed in a
clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden
decking because of the risk of bleaching the wood. A cover
lifter, or similar device, is useful for ensuring that the cover
does not come into contact with the ground. A cover lifter is
strongly recommended for spas in rental settings.
• Recommended to ask a qualified contractor or a structural
engineer to verify if the support material is strong enough to
support the maximum design load of the spa, spa water and
bathers. Read the filled weight information on the package.
WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi
10