Werbung
[EN] Safety guidelines
Note
These instructions must be read carefully and in full before installing this
product to guarantee its safe operation.
Meaning of general symbols/Symbol legend:
DANGER
indicates an immediate hazard that may lead to death or serious
injury if appropriate safety measures are not taken.
WARNING
indicates apossible hazard that may lead to death or serious
injury if appropriate safety measures are not taken.
CAUTION
indicates a possible immediate hazard that may lead to slight
injury or material damage if appropriate safety measures are not
taken.
Risk to persons and product during transport!
Make sure that the product is safely and sufficiently secured in place on or
in the transport vehicle. Please ensure you comply with legal regulations on
transport (e.g. long load signs, compliance with the relevant vehicle load
capacity, etc.). Lost or partially lost loads (e.g. tools, packaging material, etc.)
may cause accidents!
Check that the delivery is fully present before starting any installation work.
If any parts are damaged or any specifications do not match your order, stop
installation work immediately and contact ROMA!
All labels that are not relevant for any subsequent work should be removed
once the product has been installed.
Packaging material and protective film should be disposed of by a
professional to reduce risks to children (danger of suffocation, etc.) and
to protect the environment.
Hazard information:
Installation, repair and removal may only be performed by duly trained and
n
qualified personnel.
Installation requires at least two people; three people are required for larger
n
systems.
Improper installation may lead to a risk of serious injury.
n
ROMA may not be held liable for any damage caused by improper
n
installation or handling. The manufacturer is responsible for ensuring that
all parts are delivered without defect in terms of material and manufacture.
The warranty applies as per the applicable statutory provisions.
Before installing, the support structure must be tested for adequate stability.
The structure must be rigid and self-supporting. The system is not designed
to withstand forces from the support structure or to reinforce the support
structure. The installer must check that the installation material is appropriate
and adjust it to the support structure. It is essential that the instructions of
the fastening material (screws, dowels, etc.) manufacturer be observed here.
If they are not observed, there is an increased risk of lethal or severe injury
(danger of falling). The same also applies if installation instructions concerning
the wind resistance class of elements are not observed.
In addition, the mounting substructure needs to be even, level and parallel.
If this is not the case, the appropriate compensatory measures need to be
taken.
ROMA may not be held liable for any defects resulting from improper
installation, inappropriate fastening materials or a support structure that is
not sufficiently stable.
If ladders, scaffolding or anything similar is required, they must be safely
positioned. If there is a danger of falling, appropriate safety measures must
be taken.
The elements we deliver are construction products. Despite the highest
precautionary measures, there may be sharp edges or something similar,
which may result in minor injuries when handling and installing the elements.
Please use protective gloves for your own safety.
Intended use
Front-mounted external shutters are designed and constructed to provide privacy,
weather protection and temperature regulation. They are not stand-alone and are
generally mounted in front of a window or French doors. Their main purpose is to
provide privacy, sun protection or heat protection in summer and winter.
Read assembly instructions
Note
about important information on procedures and the content of
these instructions.
Task/Work process
Electrical work may only be performed by a qualified and approved electrician!
Electrical installations must comply with the German VDE 0100 standard or
n
with country-specific regulations and standards by employing an approved
electrician.
The electrician must follow the instructions accompanying the electrical
n
components supplied.
Any electrical equipment that is not required for operating the product must
n
be disconnected before starting up the product.
Improper installation may lead to a risk of serious injury.
n
ROMA may not be held liable for any damage caused by improper
n
installation or handling. The manufacturer is responsible for ensuring that
all parts are delivered without defect in terms of material and manufacture.
The warranty applies as per the applicable statutory provisions.
WARNING
Risk of electric shock when working with electrical devices!
n
When working near potentially live components such as electric wires,
n
touching them may instantly cause an electric shock.
Prior to working, de-energise the product by disconnecting it from the
power supply!
Short circuiting through power supply overloading!
n
The sun-screening element may only be connected if the motor values
correspond to the power supply!
The connection diagram must be followed to prevent damage to the motor.
n
The motors used are not intended for continuous operation.
n
Avoid running the motor in continuous operation for an extended period of
time when using this product!
The integrated thermal protection shuts off the motor after an operating
time of about 4 minutes.
The product is ready to be used again after 15 to 20 minutes.
[ EN ]
11
Werbung
