Cannot Connect Via Bluetooth - EDIFIER S351DB Bedienungsanleitung

No sound
Check if the power indicator light is ON.
Try to turn up the volume using either the master volume control or remote control.

Cannot connect via Bluetooth

Disconnect from any Bluetooth device by pressing and holding
The S351DB does not turn on
Noise coming from speakers
unplug audio cables and turn the volume up, if no sound can be heard at 1 meter away from the speaker, then
there is no problem with this product.
To learn more about EDIFIER, please visit www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section titled
Warranty Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact
information.
Troubleshooting
in Bluetooth mode, then try again.
12
English