EDIFIER S351DB Bedienungsanleitung Seite 9

OPT
1. Press the "OPT" or "COAX" button on the remote control, or press the "Volume control/Input selection" dial on
the active satellite speaker to select optical or coaxial input mode; The display window shows "OPT" or "COAX".
2. Connect audio source (Blu-ray player, Set Top Box, etc.) to optical or coaxial input port on the rear panel of the
active satellite speaker using fiber optic audio cable or coaxial cable (coaxial cable not included).
3. Play from your devices and adjust the volume accordingly.
Note:
In optical and coaxial modes, only PCM signal with 44.1KHz/48KHz can be decoded.
COAX
or
Optical and Coaxial Input
8
English