XGIMI Halo Bedienungsanleitung Seite 12

The device meets provisions of part 15 of FCC rule. Operation meets the following 2
conditions: (1) the device will not cause harmful interference, and (2) the device
must accept any interference received, including interference that may result in
accidental operations. User manual or operating instructions shall remind users that
intentional or unintentional modification and replacement of radiators without
explicit approval from the responsible compliance party may prevent the user from
operating the device. If the manual is provided in a form other than paper, such as,
provided in computer disk through the Internet, then the information required in the
section can be included in the manual in the alternative form under the premise
that users can have access to the form information.
For B-class digital or peripheral device, instructions provided by users shall include the
following or similar statements and put them in a prominent place of manual text:
Notes: the device has been tested to meet restrictions of part 15 of FCC rule on
B-class digital device. These restrictions are aimed at proving the effective
prevention of harmful interference in a residential installation. If installation and use
are not made according to the instructions, the device will generate and radiate
radio frequency energy, and may cause harmful interference to radio communica-
tion. However, there is no guarantee that interference will not occur in a particular
installation. If the device does cause harmful interference to radio or television
reception (determined by stopping and starting the device), it is suggested that
users should attempt to correct the interference by one or more of the following
measures:
- Reposition direction of receiving antenna.
- Increase the distance between the device and the receiver.
- Connect the device to a circuit socket different from the circuit connected to the receiver.
- Consult distributors or experienced radio/television technicians to seek help.
- This device is acting as a slave and operating in the 2.4 GHz(2412~2462MHz)band.
Be careful that the product may emit harmful light radiation. FCC ID:2AFENWK03A
8
FCC Alarm