Important Precautions - XGIMI Halo Bedienungsanleitung

Correct use method of the device:
Do not face lens into eyes as injury to the eyes can be caused by the strong
projector light.
Do not block the air inlet/outlet of the device in order to avoid damage to internal
electronic devices arising from normal heat dissipation failure of the device.
Do not wipe the lens directly with cleaning tools including paper and cloth
etc. in order to avoid damage to lens; please clean up the dust on the lens
surface through clean air blowing.
Do not wash the device with chemicals, detergents or any liquid in order to avoid
corrosion of circuit board by rainwater, moisture and mineral-containing liquids.
Keep the device and its components and accessories out of reach of children.
Ensure that the device is used in a dry and ventilated environment.
Do not store the device in overheated or overcooled places, because extreme
temperatures will shorten the life of electronic devices. Permissible environ-
ment for storage and use of the device in an environment of 0℃~40℃.
Do not put the device into any heating equipment (such as dryer and
microwave oven etc.) for drying.
Do not extrude the device firmly or place barriers on it or its back to avoid
damage to the device.
Do not throw, strike or sharply vibrate the device to avoid damage to the internal
circuit board.
Do not try to disassemble and assemble the device yourself. Please contact
after-sales service of XGIMI for any problem.
Do not repair any product on your own. In the case of normal operation
failure of the device or any component, you shall consult after-sales service of
XGIMI promptly or return it to the factory for repair.
Risk of explosion if the battery is replaced by an incorrect type.Dispose of used
batteries according to the instructions.

Important Precautions

7