Description; Purpose; Overview; Packing List - GreenWorks GD40SC36 Bedienungshandbuch

EN
1

DESCRIPTION

1.1

PURPOSE

The basic version of the machine is a scarifier intended for
private use, i.e. for use in home and gardening environments.
The blade cylinder is designed for ripping moss and weeds -
complete with their roots - out of the soil and for loosening
the soil.
With the additional tine cylinder, the machine can be
converted to a lawn dethatcher in just a few steps.
1.2

OVERVIEW

Figure 1-8
Bail switch
1
Start button
2
Upper handle
3
Quick-release lever
4
Middle handle
5
Lower handle
6
Rear discharge flap
7
Depth adjustment lever
8
Battery compartment flap
9
Handle knob
10
Grass catcher
11
Tine cylinder
12
Handle holder
13
Handle positions
14
Bolt
15
Spacer
16
Rod
17
Slot
18
Battery compartment flap button
19
Battery
20
Safety key
21
Slide button
22
Lock handle
23
Bearing shell
24
Blade cylinder
25
1.3

PACKING LIST

1 Scarifier/Dethatcher
2 Grass catcher
3 Handle fasteners
English
4 Cable clips
5 Tine cylinder
2 GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instructions, illustrations and
specifications provided with this power tool.Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
3

INSTALLATION

WARNING
Do not use accessories that are not recommended by the
manufacturer.
WARNING
Do not put in the safety key or the battery pack until you
finalised the assembly of all the parts.
3.1

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If parts of the machine are damaged, do not use the
machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
3.2

INSTALL THE LOWER HANDLE

Figure 2
1. Attach the handle holders to the sides of the machine.
2. Put the bolts of the handle knobs through the holders.
3. Turn the handle knobs clockwise to lock the lower
handle.
4