Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Optosensors
Slot sensor BGL 30B-001-S4
No 836 728 E • Edition 0409
Safety Notes
These photoelectric sensors may not be used in
applications where personal safety depends on
proper function of the devices.
The CE Marking confirms that our products
conform to the EC Directives 89/336/EEC (EMC)
and the EMC Law.
In our EMC Laboratory, which is accredited by the
DATech for Testing of Electromagnetic Compatibility,
proof has been documented that these Balluff products
meet the EMC requirements of the the harmonized
standard EN 60947-5-2.
Installation
Fig. 1: Dimensions
Connections
Fig.2: Connection diagram, pin assignments
Indicators and displays
Yellow LED
Output function indicator: The LED comes on as soon as
the output is active.
Green LED
Power on indicator: The LED comes on as soon as the
sensor is operation.
Settings
1. Install the angle sensor so that the light path is not
impeded (see Fig. 1, optical axis). The output is
inactive. The green LED is on and indicates ready.
2. Place the target in the light path. The light path must
be definitively interrupted. The output is now active.
The green and yellow LEDs are on.
Technical Data
Optical data
Light type
Electrical data
Supply voltageU
Rated operating voltage
Rated insulation voltage
Ripple
No-load supply current I
Effective operating current I
Voltage drop U
Switching frequency f
Output
Short circuit protected
Protected against polarity reversal yes
Switching type
Permissible load capacitance
Mechanical data
Slot width
Connection
Housing material
Lens material
Diameter of active surface
Dimensions
Weight
Time data
Turn on/turn off time
On-time delay
a optical axis
Displays
Output function indicator
Power indicator
Ambient data
Ambient temperature range T
Pin
Utilization category
1
10...30 V DC
Degree of protection per IEC 60529 IP 67
3
0 V
Permissible ambient light
4
N.O.
Infrared, 880 nm
10...30 V DC
B
24 V DC
250 V AC
< 15 %
< 35 mA
O
200 mA
e
at I
< 2.5 V
d
e
1000 Hz
PNP
yes
dark-on
< 0.5 µF
30 mm
M12 connector, 4-pin
steel, korrosion-resistant
PMMA
3 mm
83 x 50 x 14 mm
130 g
< 0.5 ms
100 ms
LED yellow
LED green
-10...+60 °C
a
DC 13
5000 Lux
Balluff GmbH
Schurwaldstrasse 9
73765 Neuhausen a.d.F.
Deutschland
Telefon +49 (0) 71 58/1 73-0
Telefax +49 (0) 71 58/50 10
E-Mail: balluff@balluff.de
www.balluff.de
2
Werbung
