Heating Time; Manual Operation - Xavax 00111971 Bedienungsanleitung

You can freely set the heating and energy-saving
times within the schedule. A maximum of 8 switching
points (4 heating times and 4 energy-saving times)
can be set per day.
The Wireless Radiator Controller / Timer is delivered
with the following factory settings:

Heating time:

Heat to comfort temperature
(factory setting:1st heating time at 7:00 AM)
Energy-saving time:
Reduce to energy-saving temperature
(factory setting: 1st energy-saving time at 10:00 PM)
Setting heating and energy-saving times
With the Wireless Radiator Controller / Timer, you can
set 4 heating times and 4 energy-saving times per
day – for each day individually or for multiple days
in a block.
DAY1 to DAY7 represent the days of the week from
Monday to Sunday. The corresponding days are
also displayed as abbreviations below the bar on
the display.
Blocking:
D1–5 = same schedule Monday to Friday
D1–6 = same schedule Monday to Saturday
D1–7 = same schedule Monday to Sunday
For days that are not programmed, the factory
➔
settings remain in effect.
Setting an individual schedule:
Press . Select
MENU
Press . . appears on the display for
OK
Monday. Select day/block using the setting wheel.
Confirm with . Use the setting wheel to set the
OK
start of the 1st heating time (Symbol
with . Use the setting wheel to set the start
OK
of the 1st energy-saving time ( symbol) Confirm
with . You can now enter a 2nd, 3rd and 4th
OK
heating/energy-saving time if desired.
➔ If you do not wish to set any further heating/
energy-saving times, confirm the „
with . The next day to be programmed
OK
appears on the display.
14
using the setting wheel.
). Confirm
" display
➔ If you do not wish to set any further days, exit the
menu using
MENU
on the display, this means that programming is
complete.
➔ You can also overwrite individual days within a
block to assign different times.
Setting the comfort and energy-saving temperatures
Press . Select the
MENU
setting wheel. Confirm with
Set the comfort temperature using the setting wheel.
Confirm with . Set the energy-saving temperature
OK
using the setting wheel. Confirm with
Range : 8 °C, frost protection function active
Range : valve fully open
➔ Tip: You can achieve maximum energy savings by
selecting an energy-saving temperature that is
approx. 5 °C below the comfort temperature.

Manual operation

You can change the room temperature at any time
using the setting wheel. In AUTO mode, this remains
in effect until the next switching point. The Radiator
Controller then switches back to the set schedule.
Additional Functions
Timer function
You can access the timer function using the timer
button . This function lets you set the
temperature for a desired time period. This can be
useful during a party, for example. Press
display shows the time for which the schedule is
to be temporarily deactivated. Confirm with
. You can now set the desired temperature. Confirm
with . You can then not manually change the
OK
temperature during the selected time period; the
setting wheel is locked. You can unlock the wheel by
pressing the menu button.
. When the temperature appears
menu item using the
.
OK
.
OK
. The
OK