Installation - Xavax 00111971 Bedienungsanleitung

appears on the display. The motor now fully
starts up to make installation easier. (
on the display once the Radiator Controller is ready
for installation (
menu at any time). Please do not push any other
buttons. Mount the device on the coupling ring.

Installation.

➔
The Wireless Radiator Controller / Timer automatically
changes over to summer and winter time. You can
also set the date and time at a later point using the
menu item. However, the Radiator Controller
will not enter the installation position afterwards.
The saved schedule is retained when the batteries
➔
Valve – coupling ring Valve – adapter, coupling ring
are changed. You may need to check the time.
Installation
The Wireless Radiator Controller / Timer can be
installed on all familiar valve bases (see adapter list)
without difficulty. There are no messes and no spills
because the hot water circuit is not broken.
1. Fully open old thermostat head, unscrew fastener
and remove from valve.
2. Choose a suitable adapter, if necessary, and mount
it on the valve.
3. Screw the coupling ring onto the valve or adapter.
4. Gently press the Radiator Controller onto the
coupling piece until you hear a click.
WARNING: You must mount the Wireless Radiator
Controller / Timer without applying excessive force;
ensure that the device is in the „
„ " position.
If you install the device at a later time, set it to
➔
in the menu before installation. Only install
the device in this position
appears
- can be selected from the
" or
Adaptation
Initial installation: Press
appears so that the Radiator Controller can start the
adaptation process. The device now adapts to the
stroke of your valve base. To do so, the device opens
and closes the valve multiple times to learn the end
points. This process may take several minutes under
certain circumstances. After successful adaptation,
the Radiator Controller switches to normal operation.
If you need to perform the adaptation process
➔
again, e.g. because the radiator is not cold in the
-position, navigate to
and wait until adaptation starts againt.
If the error appears on the display, place the
➔
Radiator Controller on the radiator valve and
briefly remove the batteries to perform a reset.
You have two options for setting your energy-saving
controller. If you wish to set the Radiator Controller
via your smartphone or tablet, begin reading under
item 1. Operation via Bluetooth. If you wish to set
the Radiator Controller manually, begin reading
under item 2. Manual Operation via the Control
Buttons.
1. Operation via Bluetooth
Download the free Xavax app from the App Store
(iOS) or the Google Play Store (Android) onto your
smartphone or tablet. Activate the Bluetooth function
on your smartphone or tablet using the settings
menu.
Open the app once you have installed it
on your smartphone or tablet. Select
the The Wireless Radiator
Controller / Timer device from the start
screen.
Setting room profiles
Tap the menu button to add a room.
Assign a name to the room in the
appropriate box and confirm your
entry with OK. Select the room you
created and then tap the menu button
again to add a device.
, until
OK
> in the menu
11