Safety Instructions; Inserting/Changing Batteries - Xavax 00111971 Bedienungsanleitung

G Operating Instructions
Operating Instructions
Please read these operating instructions before
installing the energy-saving controller. Keep these
documents for future reference and pass them on if
you give the device to someone else.
Extent of delivery
1. Wireless Radiator Controller / Timer
2. Set of operating instructions
3. Coupling ring
4. Adapters (Danfoss RA, Danfoss RAV, Danfoss RAVL)

Safety instructions

• The product is intended for indoor use only.
• The product is intended for private, non-
commercial use only.
• Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
• Use the product for its intended purpose only.
• Do not drop the product and do not expose it to
any major shocks.
• Keep this product, as all electrical products, out of
the reach of children!
• Do not modify the product in any way. Doing so
voids the warranty.
• Do not open the device or continue to operate it if
it becomes damaged.
• Dispose of packaging material immediately
according to locally applicable regulations.
Warning
• Immediately remove and dispose of dead
batteries from the product.
• Only use batteries (or rechargeable batteries)
that match the specified type.
• When inserting batteries, note the correct
polarity (+ and - markings) and insert the
batteries accordingly. Failure to do so could
result in the batteries leaking or exploding.
• Do not mix old and new batteries or batteries
of a different type or make
• Do not attempt to charge non-rechargeable
batteries, as they may explode.
• Keep batteries out of the reach of children.
10
• Do not short circuit the batteries/rechargeable
batteries and keep them away from uncoated
metal objects.
• Never open, damage or swallow batteries or
allow them to enter the environment. They
can contain toxic, environmentally unfriendly
heavy metals.
• Remove the batteries from products that are
not being used for an extended period (unless
these are being kept ready for an emergency).
Proper use
The Wireless Radiator Controller / Timer is a
programmable radiator controller that can be used
to regulate the temperature in closed rooms and
thereby reduce the consumption of heating energy.
Please use Wireless Radiator Controller / Timer only
for this purpose. You can program and control
Wireless Radiator Controller / Timer manually using
the control buttons or conveniently via Bluetooth.

Inserting/changing batteries

Remove the battery compartment cover by lifting the
cover at the indicated point (1) and then unhooking it (2).
(1)
Insert the batteries as shown (2x AA/Mignon).
Do not use rechargeable batteries. Make sure
the polarity is correct.
Setting the date and time
When you start up the device for the first time, the
year flashes once the batteries are inserted. You can
now set the date and time.
Set the year using the setting wheel.
Set the month using the setting wheel.
Set the day using the setting wheel.
Set the hour using the setting wheel.
Set the minutes using the setting wheel.
– Done!
(2)
confirm.
OK
confirm.
OK
confirm.
OK
confirm.
OK
confirm.
OK