Xavax 00111971 Bedienungsanleitung Seite 12

Select "Connect". Tap "Connect" to search for the
device. If a device is found, "New Radiator" appears
on the display.
Select this device. During initial start-up, you
must enter a PIN. The PIN is 000 000. To keep
your equipment apart, rename the devices
under the field „Title".
You can use the menu to change the PIN at
any time to keep your devices separate.
You can also end the process using "Cancel" or start
the set-up in "Offline mode".
CAUTION! The device adopts the time from the
smartphone/tablet.
Setting the comfort and energy-saving
temperatures
You can easily set the desired comfort and energy-
saving temperatures in the corresponding boxes
using the arrows on the right edge.
Setting the offset temperature
Since the temperature is measured at the radiator,
it may differ at other locations in the room. You can
set an offset to compensate for this. For example, if
you measure 19 °C instead of the set 21 °C, set the
offset to 2 °C
Current temperature
The current room temperature is displayed in the app.
Schedule type
You can program each day individually or set them
in blocks.
Individual comfort times
ON – Each day (Mo-Su) receives an individual
heating/energy-saving profile.
OFF – The weekdays (Mo-Fr) and the weekends (Sa-
Su) receive different heating/energy-saving profiles.
12
Comfort times per day
ON – 4 heating times and 4 energy-saving times can
be programmed per day.
OFF – 2 heating times and 2 energy-saving times can
be programmed per day.
Child protection
ON – Child protection active
OFF – Child protection inactive
Setting comfort times
You can now begin programming the days or blocks,
depending on which schedule type you selected. Tap
the "Start time 1" box and select the time at which
you wish your radiator to heat up. For example: 6:00
AM. Then tap the "End time 1" box and enter the
time at which you wish your radiator to switch back
to energy-saving mode.
Holiday function
You can enter your holidays in advance. The energy-
saving controller will set the temperature to your
specified value during this time. You can create up
to six holiday profiles. To specify the date and time
for the start of your holiday, tap the right arrow and
select the appropriate time and date, then specify
the end of your holiday. Finally, set the desired
temperature for the duration of your holiday.
Saving room profiles
To save your room profiles, tap "Profile" in the upper
right on Apple devices or tap the menu button on
Android devices.
Transmitting room profiles
Once you have finished programming your room
profiles, transmit them to the controller by tapping
"Finished" on Apple devices or the menu button on
Android devices. The profile is now automatically
transmitted to the device. An overview of the room
profile you created is now displayed, complete with
name, temperature and heating time.