Use Your Product - Logitech KEYS-TO-GO Einrichtungsanleitung

USE YOUR PRODUCT

Status light indications
Connecting to a different iPadOS device
1. Make sure the keyboard is turned on
2. On your iPadOS device, check that Bluetooth
is turned on Select Settings > Bluetooth > On
3. Press and hold the Bluetooth connect key on
the keyboard for 2 seconds The keyboard
turns discoverable for 3 minutes
4. Select "Keys-To-Go" from the Devices menu
Light Description
Blinking green
The battery is charging
Solid green
When charging, indicates that the battery
is fully charged (100%)
When you press the battery check key,
solid green for 2 seconds indicates that
the battery power is good (above 20%)
Blinking red
Battery power is low (less than 20%)
Recharge the battery
Solid red
When you first turn on your keyboard,
the status light shows solid red briefly
if battery power is low
Blinking blue
Fast: The keyboard is in discovery mode,
ready for pairing
Slow: The keyboard is trying to reconnect
to your iPad
Solid blue
Bluetooth pairing or reconnection
is successful
7 English