Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
System example
Important
- The 230VAC devices that are not allowed to work via the inverter must
be connected to the 230VAC before the PTS. This is important with,
for example, the on-board battery charger.
- A circuit breaker and earth leakage must be connected before the PTS
in the system.
Assembly
1.
Open the housing by removing the screws on the top.
2.
Place the screws supplied into the appropriate holes in the 4 corners
of the housing. This way the housing can be mounted on a flat
surface.
Connection
For the PTS, use 230-10 cables measuring 2.5 mmq and for the PTS
230-25 cables of 4mmq.
9
Werbung
Inhaltsverzeichnis
