Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.3 DSR-201 positioner incl. mounting bracket
for PA 30– PA 90
5.3.1 The indicator (4) is fixed to the
needle (5) with threaded stud (3)
and cannot be removed. The th-
readed stud (3) must be aligned
parallel to the position indicator (2).
Remove the adapter (6) from the
DSR positioner (1) by loosening the
threaded studs (7).
5.3.2 Attach the adapter (6) on the moun-
ting bracket (10) with Allen screws
(14) and washer. Fasten the moun-
ting bracket (10) to the pneumatic
actuator (11) through the spring
washers (15), cylindrical Allen
screws (16) and the distance bushes
(12) (not required for all PAs).
5.3.3 Center the cam (8) in the actuator
axis (17). Connector A must be
in line with the connection of the
pneumatic actuator (11). Mount the
DSR positioner (1) on the adapter
via the screws with the threaded
studs (7). Fasten the cam (8) on the
needle (5) by tightening the threa-
ded stud (9).
5.3.4 Connect the rapid connection (18) on
the actuator and positioner.
5.3.5 Connect the hose (19) between the
actuator and DSR positioner
(Connector A).
5.3.6 Connect air supply to Connector P.
‡
(3x)
(4x)
Connector P
(3x)
Connector A
–
(4x)
(4x)
(4x)
Connector A
27
Werbung
Inhaltsverzeichnis
