LD Systems DAVE G4X-Serie Bedienungsanleitung Seite 9

B
If the standard set-up of the DAVE G4X speaker system is not desired or possible, the set-up can be done
with a distance rod and a stand fork mounted on the subwoofer . In order to achieve an impressive
C
stereo sound and to avoid unpleasant interference, select the DSP preset that corresponds to this setup
variant (MODE SELECT, right symbol) and use the stereo input INPUT 3L / 4R for control (XLR/jack combo
sockets or cinch sockets).
C
To set up 2 complete DAVE G4X speaker systems, positioned left and right in front of a stage, also use
distance rods with stand forks mounted on the subwoofers . For both systems, select the DSP preset
D
that corresponds to this set-up variant (MODE SELECT, right symbol) and assign one mono channel each
(e.g. INPUT 1, SELECT LINE) to the left and right line signal of a feed device (e.g. mixing console). The
loudspeaker cables of a system should be crossed and connected to the satellites (right system in the
example).
9