Block CVR-100+ MK III Bedienungsanleitung Seite 55

Additional comfort features
Press the „Menu" button on your remote control or on the device and select „Main menu". In the following menu
you can also select „Snooze" and „Alarm clock" in addition to the already known signal sources:
Slumber:
Select „Snooze" on your remote control using the arrow keys and confirm with „Enter". The „Sleep" indicator ap-
pears. Use the arrow buttons to set the desired time when the device will automatically switches to standby mode.
Confirm your selection with „Enter". Exit this menu by pressing the „Menu" button again.
BackRound Lighting
Search for „Backlight" With your remote control and select with „Enter". Now you can choose between
„Timeout", „On level" or „Dim Level".
Quality audiostreaming
If your Internet radio station has several quality levels, you can specify the stream resolution here.
Summer and winter time
If you choose automatic time update friom „Net" please note that you have to adapt it manually. Please go
through the system settings and select „TIME / DATE" and afterwards „Daylight savings" . Choose „ON" for sum-
mer time and „OFF" for winter time.
Error Messages and Troubleshooting (Network)
Message Cause
No connection 1. Incorrect password
2. Correct password, no contact to the router
Format Error The file format is not recognized
Network Error Wrong information is received from the network
Network not Problems connecting the router
available
Network timeout No response off-line
update failed Software update failed
Troubleshoot
1. Enter the correct password
2. Disable the Mac filter on the router
Make sure the stream is encoded in WMA, MP3,
or FLAC with no more than 48 KHz. If not, please
re-encode.
The data from the server are not readable, possibly
restart the CVR-100+ MK III and the router
Switch on or restart the router
The selected station is currently not available,
please change the transmitter
Check your network settings, or try again later.
55