Block CVR-100+ MK III Bedienungsanleitung Seite 50

Adapting external Remote controls
Your CVR-100+ MK III can learn the codes from other remote controls, e.g. from a TV remote control. Proceed
as follows:
•
Press the „Menu" button on the appliance for 3 seconds, then the device enters the learning mode
•
„Press on Block FB button" will appear on the display. Press a button on the remote control to select a
function to transfer.
•
The following appears on the display: „Code from Block FB accepted" and shortly afterwards „Please
press external FB key". Now press the button on the extern remote control to release the function to be
transferred.
•
„Key code has been transmitted" appears on the display. Then it jumps back to fist point.
•
Repeat these steps until all functions (max. 50) have been transferred to your remote control unit. Exit
the programming by pressing again the „Menu" button on the device. If you have programmed a key
incorrectly, simply repeat all steps with the right keys, the device will overwrite the faulty settings.
•
To delete all programs, press and hold the keys „Back" on the device, and then restart the device com-
pletely.
50