Connecting External Devices Via Bluetooth - Block CVR-100+ MK III Bedienungsanleitung

Connect external devices via Bluetooth
®
Your device is equipped with a modern Bluetooth® interface. This allows you to pair any Bluetooth® source
with the CVR-100+ MK III. Possible sources are smartphones (iOS, Android, Windows Phone), Tablet PCs (iOS,
Android, Windows 8) or media players (iPod, similar) with Bluetooth® function. Connecting external devices
via Bluetooth® Your device is equipped with a modern Bluetooth® interface. Through this you can pair any
Bluetooth source with the CVR-100+ MK III. Possible sources with Bluetooth function are smartphones (iOS,
Android, Windows Phone), tablets (iOS, Android, Windows 8) or media players (iPod, similar). To activate the
Bluetooth® function, press the „Source" button until Bluetooth® appears on the display, then activate the
Bluetooth function on your external device. Pair an external device with the CVR-100+ MK III: On your external
device, search for Bluetooth devices in your surroundings, select your CVR-100+ MK III and begin the pairing
(coupling the devices) In case of problems, or if you need further information about the pairing, please
consult the instruction manual of the device you wish to pair with your CVR-100+ MK III. Afterwards you can
activate the music playback function of your external device and your CVR-100+ MK III will play the music.
Please note that you can only link sources using the built-in Bluetooth function. The pairing of, for example,
external speakers to the CVR-100+ MK III is not possible!
Connect your Bluetooth headset to the CVR-100+ MK III
With the CVR-100+ MK III you have the possibility to connect a Bluetooth headset via Bluetooth. Please switch
your headphones to the parry mode. press the „BT Headphone Parring" button on the device. Then press the
button again and your CVR-100+ MK III will now search for your Bluetooth output device. In this mode the CVR-100+
MK III connects automatically. If you would like to deactivate the parring mode again, please hold down the button
„BT Headphone Parring" for approx. 3 seconds.
51