Product Description And Specifications - Bosch EasySander 18V-8 Originalbetriebsanleitung

Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding and polishing of
wood, plastic, metal, filler and varnished surfaces. It is par-
ticularly well-suited for profiles, corners and hard-to-reach
areas.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
a)
(2) Battery release button
a)
(3) Rechargeable battery
(4) Battery charge indicator
(5) Dust box, complete (microfilter system)
(6) Ventilation openings
(7) Sanding plate
a)
(8) Sanding sheet
(9) Handle (insulated gripping surface)
(10) Extraction outlet
(11) Filter element (microfilter system)
a)
(12) Extraction hose
a)
(13) Dust extraction adapter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless multi-sander
Article number
Rated voltage
A)
No-load speed min
No-load orbital stroke min
A)
rate
Sanding sheet surface
Orbit diameter
Bosch Power Tools
EasySander 18V-8
3 603 CE3 0..
V= 18
−1
11,000
−1
22,000
2
cm 104
mm 1.6
Cordless multi-sander
Weight according to
EPTA-Proced-
B)
ure 01:2014
Recommended ambient
temperature during char-
ging
Permitted ambient tem-
perature during opera-
C)
tion and during storage
Recommended re-
chargeable batteries
Recommended battery
D)
chargers
A) measured at 20–25 °C with rechargeable battery PBA 18V
6.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
D) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Noise/Vibration Information
Noise emission values determined according
to EN 62841-2-4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 78 dB(A); sound power
level 86 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-4:
2 2
a = 7.0 m/s , K = 1.5 m/s ,
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
English | 13
EasySander 18V-8
kg 1.2 (2.5 Ah)–
1.5 (6.0 Ah)
°C 0 to +35
°C –5 to +50
PBA 18V...W-.
AL 18...
1 609 92A 88G | (12.08.2022)