Herunterladen Inhalt Inhalt Diese Seite drucken

Using For The First Time - RUSTA 900101040101 Gebrauchsanweisung

3 l
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

USING FOR THE FIRST TIME

• Remove all the packaging materials, labels and/or stickers from the deep fryer.
WARNING! Do not plug in the deep fryer when the control panel is not installed in
the deep fryer body. Only plug in the deep fryer when the unit is fully assembled
and the heating element is immersed in oil.
WARNING! Do not immerse the control panel, cord or plug in water.
WARNING! This unit should not be used to boil water.
• Cleaning Prior To First Use The body, oil reservoir, frying basket, frying basket handle
and the lid can be washed in warm soap water. Dry thoroughly before use.
WARNING! Do not immerse the control panel, power cord, or plugs into liquid
of any kind.
TO WASH THE DEEP FRYER
• Lift the control panel with heating element out of its slots by pushing it up from the
bottom with one hand while holding the body of the deep fryer with your other hand.
• Remove the oil reservoir from the body of the deep fryer.
• Wash the oil reservoir and the frying basket with hot water, a nonabrasive sponge,
and dishwashing liquid or other non-poisonous detergent.
ASSEMBLING THE DEEP FRYER
1. Place the oil reservoir into the deep fryer housing. (Fig. 1)
2. Insert the guide edges on the control panel into
the guide rails mounted on the metal body. (Fig. 2)
3. Slide the guide edges down as far as they can go.
Note: The deep fryer has an automatic safety switch
to ensure that the unit will not operate unless the
control panel has been inserted securely into the
guide rails on the body of the deep fryer.
4. Attach the fryer basket handle to the fryer basket
by squeezing the handle bars together and inserting
them into the metal bracket on the basket. Make sure
that the end of the bars are inserted into the bracket
holes. Lift the handle up to lock in place. (Fig. 3)
USING THE DEEP FRYER
WARNING! Never plug in the deep fryer before filling the oil reservoir with oil.
Always make sure that the control panel is securely in place in the housing of the deep
fryer and that the heating element is inside the oil in the oil reservoir before plugging in.
Fig. 1
Fig. 2
Slide down
Guide rails
Guide edges
Fig. 3
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis