Installation; Mounting Installation - Sundirect LM600-Pro Bedienungsanleitung

5. Installation

5.1 Mounting installation instruction
Note: The kit supplied in the package is designed for mounting horizontally on a solid wall. If
mounted onto other types of walls, you will need appropriate fixings (not supplied). Please make
sure the wall is safe to mount. We highly recommend to have the panel installed by a qualified
electrician or installer authorized by Sundirect.
1
3
5
2
WALL
4
WALL
6
WALL
WALL
WALL
WALL
6
Step 1. Use the supplied
mounting bracket to mark
the position of the holes
on the wall.For vertical
wall mounting "A" signal
will be the top of the
mounting bracket. For
horizontal wall
mounting "B" signal will
be the top of the
mounting bracket.
Step 2. Drill holes using a
8mm drill.
Step 3. Insert the dowels
into the holes.
Step 4. Screw the screws
into the dowels through
the holes on the
mounting bracket.
Step 5. Mount the panel
on the mounting bracket.
Step 6. Move the panel
into two directions, tight
the 4 spacers on the back
side of mirror to make
sure the panel is secured.