NetModule NB3701 Software Benutzerhandbuch Seite 228

NB3701
NRSW-Benutzerhandbuch - Version 4.7.0.100
MAX - ACCESS read - write
STATUS current
DESCRIPTION
" The operation trigger to switch to alternative software or configuration "
::= { admin 12 }
s o f t w a r e A c t i v a t i o n D a t e OBJECT - TYPE
SYNTAX DateAndTime
MAX - ACCESS read - write
STATUS current
DESCRIPTION
" The date and time when the alternative software shall be activated "
::= { admin 13 }
c o n f i g A c t i v a t i o n D a t e OBJECT - TYPE
SYNTAX DateAndTime
MAX - ACCESS read - write
STATUS current
DESCRIPTION
" The date and time when the alternative configuration shall be activated "
::= { admin 14 }
s o f t w a r e A c t i v a t e d D a t e OBJECT - TYPE
SYNTAX DateAndTime
MAX - ACCESS read - write
STATUS current
DESCRIPTION
" The Date and Time when the current running software was booted the first time "
::= { admin 15 }
-- Configuration Update --
configUpdate OBJECT - TYPE
SYNTAX URLString
MAX - ACCESS read - write
STATUS current
DESCRIPTION
" Update the system configuration from the specified URL ,
the URL must be preceded by a valid prefix ( e . g . tftp :// , sftp :// , ftp :// , https :// or http ://)
and either point to the update package or to a server directory which
contains a file named < serial - number >. zip "
::= { admin 20 }
c on f i gU p da t e S t a tu s OBJECT - TYPE
SYNTAX INTEGER {
stored (0) ,
succeeded (1) ,
failed (2) ,
inprogress (3) ,
notstarted (4)
}
MAX - ACCESS read - only
STATUS current
DESCRIPTION
" The status of the last configuration update cycle "
::= { admin 21 }
co nf ig U pd a te E r ro r OBJECT - TYPE
SYNTAX Integer32
MAX - ACCESS read - only
STATUS current
DESCRIPTION
" The error code of the last configuration update "
::= { admin 22 }
configUpdated OBJECT - TYPE
SYNTAX DateAndTime
MAX - ACCESS read - only
STATUS current
DESCRIPTION
" The date of the last configuration update "
::= { admin 23 }
c onfigUp da t eM od e OBJECT - TYPE
SYNTAX INTEGER {
full (0) ,
partial (1)
}
MAX - ACCESS read - write
STATUS current
DESCRIPTION
" The desired system configuration update mode ( full or partial ) "
::= { admin 24 }
-- Software Update --
softwar eUpdate OBJECT - TYPE
SYNTAX URLString
MAX - ACCESS read - write
STATUS current
DESCRIPTION
" Update the system software from the specified URL ,
the URL must be preceded by a valid prefix ( e . g . tftp :// , sftp :// , ftp :// , https :// or http ://)
and point to the to be installed image "
::= { admin 25 }
228