Schneider Schirme Andros Montage- Und Bedienungsanleitung Seite 36

EN
Perform the next assembly step on a clean and level surface (such as a
table).
Connect the short diagonal brace with the handle element as shown
below. To do this, place the nut in the hexagonal recess and insert the
screw (C) from the opposite side.
NOTE:
Make sure to tighten this screw connection only slightly. Tightening the
screw too tight can damage the handle element and make it harder to
open and close the umbrella.
(C)
(G)
36