Schneider Schirme Andros Montage- Und Bedienungsanleitung Seite 35

Assembly
Place the two elements of the cross base (E + D) one on top of the other
as shown and screw firmly to the tube (F).
Use the screws M8x20 (B) and one washer for each screw.
( F )
( B )
Now put the assembled cross base at the location where the umbrella is to
be set up. Make sure the ground underneath is solid and level.
Now insert 4 paving slabs in the cross base.
IMPORTANT:
Always use all four paving slabs with a size of 40 x 40 cm!
Never use the umbrella stand without paving slabs.
( E )
( D )
EN
( H )
35