Scope Of Delivery; Check Completeness Of The Delivery; Check Transport Damage - eder ESG-C 400200 Bedienungsanleitung

surface without any vibrations. The minimum knife projection setting
effectively prevents the log from splitting.

Scope of delivery

Check completeness of the delivery

The scope of delivery of the selected attachment includes:
• 1x attachment
• 1x Allen wrench 6 mm
• 1x pin wrench
• 1x setting gauge (ESG-C, EPH-C, ERH-C, EKH-C,)
• 1x operating instructions
• 1x groove nut wrench (EBF-C) / 2x groove nut wrenches (ERB-C)
The bar, chain and drive sprocket are not included in the scope of
delivery, as these must be selected depending on the chainsaw used.

Check transport damage

Visible transport damage can be recognized by packaging damage
or by scratched and deformed parts on the device.
> Be sure to make a note of the damage on the delivery note: both
> Make sure that the deliverer (driver) countersigns.
If the deliverer refuses to confirm the transport damage, you should
refuse to accept the delivery and inform us immediately. A claim in
retrospect, without a direct note on the delivery note, will not be
accepted either by the carrier or by the transport insurer.
If you suspect latent transport damage:
> Report concealed transport damage within two days at the latest,
> Make a note on the shipping documents in any case: "Goods are
Insurance companies of carriers often react very suspiciously and
refuse to provide compensation. Therefore, try to prove the damage
clearly (send a photo if possible).
59 Attachments with chain drive
on the copy you receive and on the one that you must sign.
which means that you must have checked your delivered goods
within this period. Reporting damage after this time is usually not
accepted.
accepted subject to concealed transport damage".
409001_03 | 10.2022