Genmitsu CFL55 Benutzerhandbuch Seite 10

Laser Module Installation
STEP 1: Install the Lasr Module on Genmitsu PROVer XL 4030
1. Find the Adapter Plate for PROVer XL 4030 (comes stock with the machine), Fix the laser module onto the
adapter plate with four M3*6 screws and then install the plate on your machines with four M5*10 screws.
Connecting to a PROVerXL 4030
Connecting the Laser Control Module to a PROVerXL 4030 using the 3-pin cable for GND and
PWM and +12v for the Laser Control Module.
Adapter Plate
for PROVer XL 4030
M3*6 Screws
M5*10 Screws
08