Setting Date And Time - Topcom bpm wrist 1481 Bedienungsanleitung

Topcom BPM Wrist 1481
10.4 Memory
The BPM 1481 can store up to 48 measurements including the date
and time
The main unit automatically stores the previous measured values.
Remove the batteries to erase the entire memory.
• Press the 'RECALL' button, the latest stored measurement result
is displayed.
If no data is stored, nothing will appear on the display.
• Press the 'RECALL' button successively to read previous
measurement results.
• After reading the first stored measurement, press 'RECALL'
again to show the normal time.
11

Setting date and time

The Date and time is displayed on top of the LCD panel.
To adjust the date and time:
• Press the 'SET' button to activate the unit.
• Press 'MODE', the 'month' blinks on the display.
• Press 'SET' to increase the "Year".
• Press 'MODE' to confirm, the 'month' digits start blinking.
• Follow the same instructions as used for the year to change
Month, Day, Hours and Minutes.
• After confirming the Minutes, you will leave the time setting menu.
14