Topcom bpm wrist 1481 Bedienungsanleitung Seite 13

10.3 Measurement
• Press 'START/STOP'. All digits will light up, checking the display
functions. The checking procedure will complete after about 2
seconds.
• After all symbols disappear, the display will show "0".
• After the checking procedure, the monitor automatically inflates
the cuff to approximately 180 mmHg, the measurement will
begin.
• The air pressure will slowly decrease.
• When the measurement is completed, systolic, diastolic and
the Pulse Rate will be shown simultaneously on the LCD screen
(see §7).
• When a mistake was detected during measurement the Error
mark 'Error' appears on the display (see §12).
• After deflation, the measurement of blood pressures is
completed.
• The power will turn off automatically within 1 minute if no button is
pressed.
Topcom BPM Wrist 1481
13