Disassembly And Storage - Bestway Lay-Z-Spa Fiji Airjet Bedienungsanleitung

DISASSEMBLY AND STORAGE

DRAINING THE SPA
1.
NOTE: Dry the spa pool.
3.
5.
Make sure the spa and pump are completely dry. This is essential to extend the life of
the spa. We recommend using the pump to blow dry the spa, pump and pipes.
Remove the filter sets and discard the used filter cartridges. Re-attach the two
stopper caps onto the spa's inlet and outlet valves. It is recommended you store the
spa in its original package in a warm [above 15°C (59°F)] and dry place.
CLEANING THE SPA
Detergent residues and dissolved solids from bathing suits and chemicals may build
up on the spa walls. Use soap and water to clean the walls and rinse thoroughly.
NOTE: DO NOT use hard brushes or abrasive cleaners.
2.
4.
21
P05347