Palazzetti ET4W Verwendung Und Betrieb Seite 28

Then proceed as follows:
ET4W EPlus
AP MODE
xx : xx : xx : xx : xx : xx
version ET4W EPlus
Hold + button
to start scanning
for remote
28
Fig. 21
Fig. 22
C
Fig. 23
Use the or keys to navigate until the
INFO menu is displayed.
On Screen 5 press the
changes screen, and the message "remote:
scanning ..." appears.
Insert the batteries in the remote control (2 x
AAA 1.5V) and simultaneously press keys 1 and
8 on the remote control until it vibrates 3 times.
After a few seconds the display will change
screen, the following information will appear
"Fig. 24" on page 29 and the remote control
will be correctly paired with the control panel:
004779060 - 27/06/2022
key, until the display