Volume Adjustment; Switching The Device On - Hama DR350 Kurzanleitung

Risk of electric shock
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not use the product if the AC adapter, adapter
cable or power cable is damaged.
• Do not attempt to service or repair the device yourself.
Leave any service work to quali ed experts.
4. Before commissioning
• Connect the power supply unit to a properly installed
socket.
Operating instructions
• If there is a choice of different buttons (e.g. YES
or NO), the selected button has a light-coloured
background.
• In menus offering a variety of different options
(e.g. Equalizer, Update, etc.), the option currently
selected is marked with [ ü ].
4.1 Navigation and control
[VOLUME/SELECT/NAVIGATE] has a dual function:
A) Menu
• Turning [VOLUME/SELECT/NAVIGATE] in the menu
allows you to select individual menu items.
• Pressing [VOLUME/SELECT/NAVIGATE] con rms your
selection.
B) Playback display
• Turning [VOLUME/SELECT/NAVIGATE] in the playback
display changes the volume of the radio.
• Turning [VOLUME/SELECT/NAVIGATE] to the left or
right reduces or increases the volume of the radio.
Note
• If you are in the playback display, use [ ] to switch
between the volume control and the station list
selection.
• Press [ ] to display the current input mode. If the
station selection is active, the info symbol appears
in the display and the station list description. Turning
[VOLUME/SELECT/NAVIGATE] allows you to navigate
through all of the stations found.
If you are in the menu, return to the playback display by
pressing [ ].
Press [ ] to return to the previous menu level.
4.2 Switch On / Off / Standby
• Press [ ] to switch the radio on or off (standby).
Note
• Disconnect the radio from the power supply to switch
it off completely.

4.3 Volume adjustment

Turning [NAVIGATE/ENTER/VOLUME] (16) increases /
reduces the volume.
5. Getting started
Note - Optimal reception
• Pull the antenna out completely.
• We recommend you adjust the antenna vertically to
ensure optimal reception.

5.1 Switching the device on

• Connect the power cable to a properly installed power
socket.
Warning
• Only connect the product to a socket that has been
approved for the device. The electrical socket must
always be easily accessible.
• Disconnect the product from the power supply using
the on/off switch – if this is not available, unplug the
power cord from the socket.
• Wait until the radio initialisation procedure has nished.
3