Maintenance Intervals - Velmia THC2 Gebrauchsanleitung

16
1. Remove the retaining cotter pin from the tow bar's coupler
pocket.
2. Push the tow bar onto the coupler on the bicycle so that the
cotter pin holes in the coupler and coupler pocket are aligned.
3. Insert the cotter pin into the hole and lock the cotter pin fas-
tening.
4. Check that the connection between the coupler and the tow
bar is secure.
5. Guide the tow bar's retaining strap through the braces of the
rear wheel so that the trailer is securely connected to the bi-
cycle frame.
6. Hook the retaining strap with the carabiner hook into the eye
on the tow bar. Make sure that it cannot flutter into the rear
wheel's spokes during the journey.
DANGER
Always secure the tow bar to the bicycle frame with the retaining
strap. This ensures that the trailer will remain connected even if
the tow bar becomes detached from the coupler.
Irrespective, the coupler must always be properly mounted and
the connection to the tow bar must be secured with the locked
cotter pin. Otherwise the tow bar can be come detached and can
be pushed into the rear wheel's spokes during braking.

7. Maintenance intervals

Before every ride, check whether the tow bar, coupler and buggy
wheel and their attachments are technically OK.
[AE] INSTRUCTIONS FOR USE