Connecting The Trailer To A Bicycle - Velmia THC2 Gebrauchsanleitung

INSTRUCTIONS FOR USE [AE]
DANGER
The axle nut must be tightened in order to assure sufficient clam-
ping force. Therefore, observe the assembly instructions for the
hub and the manufacturer's torque specifications when tightening
the axle nut.
NOTICE
Due to the construction of the coupler, slight wear and tear in the
form of scratches can occur at the connection between bicycle
frame and coupler. This is not a reason for a complaint.
DANGER
Do not use a washer or similar at the connection between the bi-
cycle frame and coupler because this could negatively affect the
stability of the connection.

6. Connecting the trailer to a bicycle

DANGER
Do not connect the trailer to a bicycle until the following condi-
tions have been fulfilled:
- The trailer is fully loaded.
- The children are wearing bicycle helmets or use a head rest
and are properly fastened in.
- The buggy wheel has been removed.
- The tow bar load has been checked and is within the permis-
sible range (3 – 8 kg).
15