Dsp Effects; Transpose; Octave Setting; Piano Mode - Classic Cantabile CPK-203 Bedienungsanleitung

DSP effects

The DSP effect simulates sounds in their real environment. With the DSP effects, you can
add sonic atmosphere and depth to your play.
This function is turned on by default. Press the [DSP] button to turn off the DSP effect.

Transpose

The transpose function allows you to adjust the pitch of the instrument up or down in
semitone steps.
Press the [TRANSPOSE] key to enter the corresponding menu. The display shows the
current value of the transposition.
Use the [+]/[-] keys to tune the instrument higher or lower in semitone steps.
Pressing the [+]/[-] keys at the same time returns you directly to the standard C tuning (value
0).

Octave setting

The Octave function allows you to shift the pitch of the Main Sound (R1) up or down by one
or two octaves.
You activate and manage this function in the function menu.
Note:
The octave function may cause the selected sound to go outside its natural range, making it
sound unnatural in the highest or lowest ranges.

Piano mode

The [PIANO] key takes you directly to the highest quality piano sound of the instrument. It is
recommended to activate this function if you want to use the instrument for playing piano.
Press the key again to exit the piano mode.
Note:
In piano mode, you can still use the rhythm function of the auto accompaniment. However,
the chord detection is disabled.
14