AEG bmg 4922 Bedienungsanleitung Seite 46

English
50
i. An irregular heartbeat has been
identifi ed, if the IHB symbol
appears on the display.
j. The result will automatically be
stored.
Stored measurement results calling up and deleting
If you want to call up stored measurement results, the
device must be in the display mode.
You can have the average value of the last three measure-
ments displayed.
or
call up to 60 stored measurements.
1. Press the MEM button after
taking your blood pressure.
The average value of the last
three measurements will be
displayed.
2. Press the MEM button again
and the fi rst stored value will be
displayed.
M01 = fi rst memory location
M02 = second memory location,
etc.
3. If you would like to quickly view
a certain measurement result,
repeatedly press the MEM
button to change the memory
location.
Deleting the memory
Press the MEM
START/STOP button for about
3 seconds in this display mode to
delete the memory.
Evaluation of your measurement results
Following, you will a table after which the WHO (World
Health Organization) assessed the measured values.
180
160
140
or
130
120
button and the
Note:
• The device is suitable for adult blood pressure
measurement.
• Risk factors such as diabetes, obesity, smoking etc.
are not entered into these tables.
• A fi nal evaluation of your blood pressure by a
doctor is essential.
Strong high blood pressure (Grade 3)
High blood pressure (Grade 2)
Light high blood pressure
(Grade 1)
Slightly elevated
blood pressure
Normal
80 85 90 100 110