Supply Power To Devices; Cleaning, Maintenance, Storage, Disposal; Cleaning; Maintenance - Zipper Maschinen ZI-PS330 Betriebsanleitung

11.3.2

Supply power to devices

Select one or more connection types with which you want to supply a connected device with power.
To do this, first activate the on-off switch (function key A) and then press function keys C (for DC op-
eration), D for USB operation and E (for AC operation).
The output port will NOT operate until the appropriate button is pressed to activate the port. When
the output is activated, the indicator on the button will light green, indicating that the output(s) are
active, and the LCD display will turn on and display details about the charging output. The LCD dis-
play will automatically turn off when no outputs are active.
The product will enter sleep mode (no new output load) after 120 seconds of inactivity and will "wake
up" when a charging cable is plugged in or a button is pressed.
Press the ON/OFF button(s) to turn off the output(s) when not in use.
Further information:
Power supply during charging only for DC/USB not for AC connection:
The product's advanced battery management system allows a connected device to be operated via
the DC output and USB output while the product is charging.
DO NOT CONNECT ANY LOAD THROUGH THE AC OUTPUT WHILE CHARGING THE PRODUCT.
Overload condition:
When an overload occurs at the port, the product automatically turns off the AC output. The blue
indicator light on the display remains lit. However, the DC OUTPUT status (3) on the display remains.
Note for cooling fan:
The product has an internal cooling fan that ensures that the product operates within the correct
temperature range. The fan automatically turns on at higher loads during discharging or charging.
The fan may operate intermittently to keep the internal temperature within the operating range.
The fan usually turns on when the AC port is activated to ensure proper operation.
12

CLEANING, MAINTENANCE, STORAGE, DISPOSAL

12.1

Cleaning

Regular cleaning guarantees the long life of your product and is a prerequisite for its safe operation.
NOTE:
Incorrect cleaning agents can lead to paint and other material damage to the product! Do not use
solvents, nitro thinner or other cleaning agents for cleaning. Observe the specifications and instructions of
the cleaning agent manufacturer and DO NOT use compressed air to clean the side cooling air openings,
as this will cause foreign particles to enter the internal circuits.
Make sure the product is disconnected from all input power sources and output devices. Wipe the product
with a clean, dry, soft, lint-free cloth. Remove any debris, dirt or other obstructions from both side vents.
When clearing debris from the side vents, be careful not to allow the debris or other blockage to enter the
product housing.
Warning: To avoid the risk of electric shock, DO NOT use metal objects to clean the terminals.
12.2

Maintenance

The product is low-maintenance and only a few parts need to be serviced. Malfunctions or defects that
affect your safety must be rectified immediately!
Recharge as required. There are no predetermined intervals at which the product must be charged as long
as it is used regularly. Avoid completely discharging the product on a regular basis, as this may affect its
service life.
Regularly inspect all connections and the charger for debris, dirt, damage and corrosion. DO NOT attempt
to repair them.
DO NOT cover the product with towels, clothing or other objects.
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
21
ZI-PS330 & ZI-PS1000