Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instruction
IMPORTANT
EN
ONLY intended for connecting master brake cylinders for automotive applications
Always make certain that the adapter is securely connected to the master brake
cylinder before filling with brake fluid.
Do NOT start the engine when you are filling brake fluid.
Ensure that the lighting in the working area is sufficient.
Keep children and unauthorised persons away from the working area.
Ensure that the workplace is clean, dry and tidy. Keep it free of other materials
which are not required for the work to be conducted.
PREVENT persons who have not been adequately trained from using this tool set.
Always wear gloves when working with the tool set.
Always wear ear protectors.
Disposal: The disposal of old or used parts must be conducted in accordance with
applicable local provisions, or be assigned to a local company.
1. Instructions
1. Remove the sealing cover from the ex-
pansion tank on the brake master cylinder
2. Extract the brake fluid as far as possible
3. Select appropriate adaptor
4.
Connect bleeder unit to the adaptor via
quick-release coupling (Fig. 1)
www.herthundbuss.com
5. Observe device and vehicle manufactur-
er's instructions
6. Carry out a leak tightness test to ensure
that the adaptor is correctly seated and
fully sealed.
J9300006
6
Werbung
