Dust/Chip Extraction - Bosch GEX 150 TURBO Professional Originalbetriebsanleitung

Material
– All wooden materials
(e. g., hardwood, soft-
wood, chipboard,
building board)
– Metal materials
– Masonry, stone
– Marble
– Granite
– Ceramic
– Glass
– Plexiglas
– Automotive paint
– Corian®
– Varicor®
Selection of the Sanding Plate
Depending on the application, the machine can
be equipped with sanding plates of different
hardness:
– Soft sanding plate: Suitable for polishing and
sensitive sanding (also for curved surfaces).
– Medium sanding plate: Suitable for all sand-
ing applications and general-purpose use.
– Hard sanding plate: Suitable for high sanding
capacity on flat surfaces.
Replacing the Sanding Plate
Note: Replace a damaged sanding plate 5 imme-
diately.
Pull off the sanding sheet or polishing tool.
Completely unscrew the screw 6 and take off
the sanding plate 5. Attach the new sanding
plate 5 and tighten the screw again.
Note: When attaching the sanding plate, pay at-
tention that the toothing of the drive element
engage into the openings of the sanding plate.
Bosch Power Tools
Application
For coarse-sanding, e. g. of rough, unplaned
beams and boards
For face sanding and planing small irregulari-
ties
For finish and fine sanding of wood
For pre-sanding
For shaping and braking edges
For final sanding and forming
For polish-sanding and rounding off edges

Dust/Chip Extraction

Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one's health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
specialists.
– Use dust extraction whenever possible.
– Provide for good ventilation of the work-
– It is recommended to wear a P2 filter-
Observe the relevant regulations in your
country for the materials to be worked.
ing place.
class respirator.
1 609 929 N99 | (14.11.08)
English | 17
Grain size
coarse 40
60
medium 80
100
120
fine 180
240
320
400
coarse 60
medium 80
100
120
fine 180
240
320
400
very fine 600
1200