Beetronics 7HD7M Bedienungsanleitung Seite 8

Beetronics User Manual | Bedienungsanleitung | Manuel d'utilisation
Safety precautions & Maintenance
Maintenance
CAUTION! Repairs from a person besides an engineer or partner of Beetronics B.V. will nullify any warranty claim. Modifying or
opening the product by the customer may result in damage to the monitor and will nullify any warranty claim.
CAUTION! Do not store or use the monitor in locations exposed to extreme heat, direct sunlight or extreme cold. In order to
maintain the best performance of your monitor, prevent damage and maximize its lifetime, please use the monitor in a
location that falls within the recommended temperature and humidity ranges:
Operating temperature: -20c° to +60c°
Storage temperature: -20c° to +70c°
Humidity level: 20% - 90% non-condensing
NOTICE! Do not press on the LCD panel or edge of the frame, as this may result in display malfunctions, such as interference
patterns, etc. If pressure is continuously applied to the LCD panel surface, the liquid crystal may deteriorate or the
LCD panel may be damaged.
NOTICE! Do not scratch or press the LCD panel with any sharp objects, at this may result in damage to the LCD panel. Do not
attempt to brush with tissues as this may scratch the panel
NOTICE! Stains on the cabinet and LCD panel surface can be removed by moistening part of a soft cloth with water or by using
a screen cleaner (available as an option). Chemicals such as alcohol and antiseptic solution may cause gloss varia-
tion, tarnishing, and fading of the cabinet or LCD panel, and also quality deterioration of the image. Never use thinner,
benzine, wax, or abrasive cleaner as they may damage the cabinet or LCD panel surface.
Important information for Burn-in/Ghosting
Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic
screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static
images over an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen.
"Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the
"burned in" or "after-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has
been switched off.
WARNING! Failure to activate a screen saver, or a periodic screen refresh application may result in severe "burn-in" or
"after-image" or "ghost image" symptoms that will not disappear and cannot be repaired. The damage mentioned
above is not covered by the warranty. Consult a service technician if the monitor does not operate normally, or you are
not sure what procedure to take when the operating instructions given in this manual have been followed.
8 EN