Beetronics 7HD7M Bedienungsanleitung Seite 13

Beetronics User Manual | Bedienungsanleitung | Manuel d'utilisation
Installing the touchscreen
Installing the touchscreen
Setup
Calibrating the touchscreen
Linux: Beetronics touchscreens can be calibrated with universal third-party PCAP drivers depending on the Linux distribution
used. Various commonly used Linux distributions have integrated PCAP drivers by default and will recognize the
touchscreen automatically.
Windows:
Beetronics touchscreens work plug and play with Windows operating sys-
tems. The touch functionality can be configured and calibrated using the calibration tool
in the Windows Control panel. The calibration must also be completed if multiple displays
are connected simultaneously.
1. Open the Windows Control Panel and select Hardware and Sound. Open the Tablet PC
Settings section and select Calibrate the screen for pen or touch input. Alternatively,
you can hit the Windows key, type calibrate and select Calibrate the screen for pen or
touch input.
2. Click "Calibrate" and follow the on-screen Calibration wizard.
macOS:
To use a Beetronics touchscreen with macOS, the UPDD driver must first be
installed. The UPDD driver can be downloaded here:
www.beetronics.com/download/macOSdriver
After completing the download, run the .dmg file and follow the on-screen installation
wizard. Make sure to allow the extensions to be installed when prompted by macOS
during installation.
13 EN