Delivery Set; Safety Notice - Lighting Technologies TITAN LED Montageanleitung

MANUAL

DELIVERY SET

- Luminaire, pcs - 1
- Manual, pcs - 1
- Package, pcs - 1
- Hex wrench SW2.5, pcs - 1
- Fasteners kit, pcs - 1
FUNCTION
- Сeiling luminaire with LED light source is designed for general illumination of administrative,
public and industrial premises, where luminous flux pulsation factor is not limited.
- Replacement of the luminaire light source is available in the factory or in a specialized service.
- Luminaire corresponds to the safety requirements IEC 60598-2-2, EN 55015.

SAFETY NOTICE

- Never work on the luminaire when voltage is switched on.
- Do not operate the luminaire without protective grounding.
Position the luminaire to avoid long viewing into the luminaire at a
-
distance of less than 0.5 m.
- Only operate the luminaire if the diffuser is undamaged.
Unauthorized disassembling, modification and repair is prohibited. In
- case of malfunction, the luminaire should be immediately switched off
and report to manufacturer or specialized luminaire service.
The LED luminaries are considered as low-hazard solid domestic
- waste and should be disposed according to Directive 2002/96/EC
WEEE.
INSTALLATION AND OPERATION RULES
The luminaire should be used according to «Standard code of customer electrical installations».
Installation, cleaning and replacing of the components should be done only with the main power
off. The diffuser should be cleaned with soft cloth and mild detergent.
1. Tools to be used:
4