Delivery Set; Safety Notice - Lighting Technologies Inox Led 80 Montageanleitung

MANUAL

DELIVERY SET

- Luminaire, pcs - 1
- Manual, pcs - 1
- Package, pcs - 1
FUNCTION
- overhead luminaire with LED light source is designed for illumination of industrial and business
premises.
- Replacement of the luminaire light source is available in the factory or in a specialized service.
- Luminaire corresponds to the safety requirements IEC 60598-2-2, EN 55015.

SAFETY NOTICE

- Never work on the luminaire when voltage is switched on.
- Do not operate the luminaire without protective grounding.
Position the luminaire to avoid long viewing into the luminaire at a
-
distance of less than 0.5 m.
- Only operate the luminaire if the diffuser is undamaged.
Unauthorized disassembling, modification and repair is prohibited. In
- case of malfunction, the luminaire should be immediately switched off
and report to manufacturer or specialized luminaire service.
The luminaire has passed a high voltage test for insulation and electric
-
strength according to IEC 60598-1.
The LED luminaries are considered as low-hazard solid domestic
- waste and should be disposed according to Directive 2002/96/EC
WEEE.
INSTALLATION AND OPERATION RULES
The luminaire should be used according to «Standard code of customer electrical installations».
Installation, cleaning and replacing of the components should be done only with the main power
off. The diffuser should be cleaned with soft cloth and mild detergent.
1. Unpack the luminaire.
2. Remove protective film from luminaire body and mounting bracket.
3. Remove bracket from the luminaire, by unscrewing 4 screws.
4. Attach the bracket to bearing surface.
5. Attach the luminaire to the bracket with screws and washers (included) having set tilt angle
desired.
6. Connect mains cable to terminals according to polarity shown.
These instructions assume expert knowledge corresponding to a completed professional
education as an electrician.
4